Refer to applicable section below.

The Faucet is leaking.
Clean faucet and vent holes completely.
Check coupling gasket. Tighten if needed. If worn, frayed or twisted, repair or replace as needed.
Assure coupling nut is tight.
Inspect valve stem washer or valve seat and repair or replace as needed.
Tighten faucet bonnet and/or replace ball friction washer or bonnet washer.

The Shank is leaking.
Check hex or wing nut to assure it has a beer line washer and tighten as needed.
Check ring keeper and coupling nut to assure they are assembled properly.
Make sure coupling nut is tight.
Assure that the faucet has a coupling washer in it and is tightened properly.

A beer line is leaking.
Repair, replace or splice line.
Assure that beer line washers are used and are tightened properly.

CO₂ line is leaking.
Inspect check valve and repair or replace as needed.
Tighten CO₂ hex nut.
Assure CO₂ washer is properly placed and seated.

Keg is leaking.
Remove keg. Mark leak with a marker and return as defective.

Tap assembly is leaking.
Repair, replace and/or tighten tap CO₂ connector.
Tighten beer line connector.
Inspect check valves and replace or tighten.
Tighten, repair or replace CO₂ safety relief valve.

Is problem solved?

Yes No